Wood Rot Repair in Southern California
Soft, dark, crumbling wood is a fungus following water. It is often found alongside termite damage, and both need fixing for the repair to last.
Dry rot, despite the name, is a fungus that only grows in wood that has been wet. It shows up where water sits or splashes repeatedly: fascia boards and eaves under a leaking gutter or a sprinkler's overspray, door and window trim where caulk has failed, deck boards and railings, and the sill plates at the base of a wall. Rotted wood turns dark, feels soft or spongy under a screwdriver, and eventually breaks into cube-shaped chunks. In Southern California it is frequently discovered during a termite inspection, sitting right beside drywood termite galleries, because the same damp, sheltered spots suit both.
Fly Guys Pest Control inspects the structure, identifies the extent of the rot and whether termites are present in or near it, removes and replaces the damaged wood, and seals the moisture source so the new wood does not meet the same fate. Where termite activity is found alongside the rot, it is treated as part of the same job rather than left for a separate visit. The result is a repair that addresses the cause as well as the symptom.
Signs of Wood Rot on a Home
Soft or spongy wood
Trim, fascia, or deck boards that give under thumb pressure or let a screwdriver sink in are rotted below the surface.
Dark, cracked, cubed wood
Wood that has darkened and broken into roughly cube-shaped pieces is advanced dry rot.
Peeling paint on fascia or trim
Paint bubbling or flaking along eaves, fascia, and window trim often means the wood underneath has been holding water.
Stains below gutters or sprinklers
Stained or streaked fascia under a gutter joint, or trim repeatedly hit by irrigation overspray, is where rot starts.
Sagging deck boards or loose railings
Decking that flexes or railings that wobble can mean rot at the fasteners and support points.
Rot found with termite damage
Rotted wood next to drywood termite frass or galleries means both problems are present and need to be handled together.
Our Wood Rot Repair Process
Inspect the structure
We examine fascia, eaves, trim, decks, sills, and the surrounding framing to determine how far the rot extends and whether termites are active nearby.
Remove the damaged wood
Rotted sections are cut back to sound wood so the repair is anchored to material that will hold.
Replace and seal
New wood is fitted, primed, and sealed, and the moisture source, whether a gutter, a sprinkler head, or failed caulk, is corrected so the problem does not return.
Treat adjacent termite activity
Where drywood or subterranean termites are found alongside the rot, they are treated as part of the same job.
Frequently Asked Questions
Is dry rot the same thing as termite damage?
No. Dry rot is a fungus that grows in damp wood; termite damage is insects eating the wood. They look different up close but often appear together, and a repair that fixes one and ignores the other does not last.
Can rotted wood just be filled and painted?
Filler over soft wood hides the problem while the rot keeps spreading underneath. The sound repair is to cut the rot back to solid wood, replace it, and stop the water that caused it.
Where does wood rot usually start on a Southern California home?
Fascia and eaves under gutter joints, door and window trim with failed caulk, deck surfaces, and anywhere irrigation overspray hits the house daily. Dry climate or not, repeated wetting is what the fungus needs.
Will the rot come back after the repair?
Not if the moisture source is corrected along with the wood. That is why sealing the leak or redirecting the sprinkler is part of the repair rather than a suggestion for later.
How do I get a wood rot inspection?
Call (909) 736-4750, or mention wood rot on your quote request. If you already have a termite inspection scheduled, tell us and we will check for rot at the same visit.
Other Services
Get a Free Wood Rot Repair Quote
Call now or send a message — we'll get back to you the same day.